"SOFTRAX" Softfall® is a seamless surfacing system consisting of a unique single component moisture cured polyurethane binder combined with black SBR rubber shred or granule to form a highly shock absorbing cushion or base layer. The thickness of the Softfall® base is dependant on the free height of fall of the various peices of equipement. A coloured Softrax wet pour rubber wear layer, usually 15-20mm in thickness is then installed over the Softfall® base. Colourful designs and shapes may be incorporated into this surface. The top layer comes in several types, however, the three that we commonly install are EPDM, precoloured styrene butadiene rubber (SBR) and TPV.
We have recently become an accredited installer of the product known as Polysoft.
It is a cast-in-situ process which enables the surface to be easily installed around existing play equipment and on awkward shaped areas. The thickness of the surface can easily be varied over a playground to accommodate the different requirements of various pieces of play equipment.
A wear layer can be installed directly over an existing concrete or asphalt area, normally with little or no prior treatment to the existing surface. As the system is installed by a "wet pour" process the finished surface effectively becomes one large mat covering the entire playground area without any problem joints.
The surface can be 'moulded' around posts, mounds, into garden beds, concrete and timber edges
- Jogging Tracks
- Outdoor Recreation
- Hills and Sloped Surfaces
- Encapsulate Hard Objects
- Tree surrounds
- Roof tops
- Aged Care facilities
- Swimming pool surrounds
- Build up to door entrances to avoid trip hazards
- Durability and Vandal Resistance
- Comfort and Slip resistance
- Sound and Vibration Absorption
- Water Permeable
- Resilience over a Wide Temperature Range
- Virtually Maintenance Free